|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: SME 3009 measurement question (picture) posted by babylonart@aol.com on November 13, 2006 at 09:07:22:
Get a copy of the alignment card sent out to you.Basically, don't worry about anything at this point. Once you have the alignment card, you simply slip it over the spindle and set the stylus on the alignment card indentation. Then move the arm forward or back to establish the alignment.
There is not specific need for the pivot point to be exactly as described, since the pivot distance, the arm length and the overhang all work together to give you the Stevenson alignment used by these 3009 arms.
email your address to jim_howard_pdx@yahoo.com.
As Garth says you can build your own alignment card. If you pull down one of the alignment tools on vinylengine.com you can measure 60.3 mm and punch a hole for the spindle. You will find printing on thick glossy photo paper will give you the best overall alignment card.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Send me your address to my email and I will.... - tubesforever 11/13/0609:53:49 11/13/06 (1)
- Technically speaking the null points are not per Stevenson rather ... - Garth 10:10:42 11/13/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
