|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: SME 3009 measurement question (picture) posted by babylonart@aol.com on November 13, 2006 at 09:07:22:
The early 3009 models have a pivot to spindle distance of 213.3-213.5mm.8.93" is 226.8mm which is the effective length of the MKI and S2(early) models. It is NOT the pivot to spindle distance for ANY 3009 series arm.
The mounting distance, that which you are illustrating in your picture, is 213.5mm 8.40". Set the distance to the pivot at the base to 213.5 and adjust from there to dial in the alignment.
You really should have a protractor with null points at 60.3 and 110.9mm. With a drawing program on your PC and a laser printer you can make your own quite easily.
It appears the arm is mounted correctly except for the future you may want to rotate the base about 30 degrees counter-clockwise rather than have it "point" directly at the spindle.
Good luck.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I think your data is partially wrong. - Garth 11/13/0609:33:05 11/13/06 (2)
- Re:rather than have it "point" directly at the spindle - ffrr 23:40:56 11/13/06 (0)
- Re: I think your data is partially wrong. - babylonart@aol.com 12:42:34 11/13/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
