Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: The pulley simply snaps onto the motor shaft but ... posted by garth on April 30, 2002 at 00:06:54:
I think you have to buy the whole motor and circuit board from REga to get the pulley. The upgrade motor kit sells for $250 (Canadian) but if you can find an original one they sold for $160 (Canadian) and are frankly in my opinion as good or better. However, if you could find just a pulley from a junker it's not hard to modify the circuit board. The 220 volt resistor will be 10 to 20K Ohms minimum 3 Watt and the 110 volt resistor is 3 to 4 K Ohms. I'm not sure what they use for the 50 Hz capacitor or if it is even different but the 60 Hz capacitocr is 0.15 uF 630 Volt bipolar but you could get away with as little as a 250 Volt.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: The pulley simply snaps onto the motor shaft but ... - AR guy 04/30/0218:21:27 04/30/02 (1)
- The 50Hz motor should sync ... - garth 03:12:16 05/1/02 (0)