Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Check with John Elison posted by flood2 on April 28, 2020 at 14:21:29:
Thanks for the info.
Yes, I was reading through John Ellison's posts this afternoon. In one post he said he preferred the At33ev over the 33pgt, also claiming--IIRC-that the PGT had a higher compliance than the EV. Not sure though, the AT website specs them as the same compliance-wise. I read a post somewhere that talked about the different way AT specs compliance ...on 100hz rather than 10 hz and suggested the true dynamic range was someplace between their static compliance and dynamic compliance number.
Following that advice, I went to the Vinyl Engine calculator and entered my Ittok LVII weight of 11.5 Gramm. That's where I came up with the 7HZ number.
Sorry if I've given you a headache. As many of us do, I'm buying the cartridge online and installing it myself. Just want to to make sure it's right.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Check with John Elison - MaxwellP 04/28/2014:44:42 04/28/20 (2)
- RE: Check with John Elison - flood2 15:15:44 04/28/20 (1)
- RE: Check with John Elison - MaxwellP 15:21:00 04/28/20 (0)