Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Using the Geodisc with an SME 312s posted by Peter C on December 3, 2017 at 18:14:33:
There seems to be a discrepancy in the geometry parameters presented by SME for the SME 312-S tonearm. It might have a different alignment from the SME V-12 tonearm, which has null-points of 66-mm and 120.9-mm -- the same as the Geodisc. If you want to confirm the SME 312-S has a different alignment, measure the distance from the center of the spindle hole to the alignment null-point on the SME protractor. It should be 66-mm if it is the same as the SME V and the SME V-12 tonearms.
.....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Using the Geodisc with an SME 312s - John Elison 12/3/1718:58:57 12/3/17 (4)
- RE: Using the Geodisc with an SME 312s - Peter C 17:54:09 12/4/17 (3)
- RE: Using the Geodisc with an SME 312s - John Elison 23:49:53 12/4/17 (2)
- Yes, that's it - B.K. 01:12:00 12/17/17 (0)
- RE: Using the Geodisc with an SME 312s - Peter C 12:44:25 12/5/17 (0)