Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: SRA related part two posted by Johno on July 5, 2017 at 21:13:29:
For the purposes of calculating VTA, I estimated the cantilever pivot point to be located at the beginning of the 6-mm long cantilever. It is actually a lot more complicated than that because the cantilever doesn't actually have a fixed pivot point. The cantilever is attached to the cartridge structure with a spring-steel wire and the actual pivot point varies along the length of the spring-steel wire based on the frequency of the stylus movement. In other words, the pivot point changes location for different groove frequencies.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: SRA related part two - John Elison 07/5/1721:35:03 07/5/17 (6)
- RE: SRA related part two - dave slagle 04:59:37 07/6/17 (5)
- RE: SRA related part two - John Elison 17:25:34 07/6/17 (4)
- RE: SRA related part two - dave slagle 18:34:01 07/6/17 (3)
- RE: SRA related part two - John Elison 03:59:43 07/7/17 (1)
- RE: SRA related part two - dave slagle 05:01:00 07/7/17 (0)
- RE: SRA related part two - Whitesnake 19:26:37 07/6/17 (0)