Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Thoughts on Dynavector 10X5 for my TT and system? posted by TheDudeNextDoor on May 23, 2017 at 16:45:07:
You can practice aligning your cartridge with the old stylus installed. Once you get it perfectly aligned, you can switch to the new stylus. The new stylus will be identical to the old one so it will not be necessary to realign your cartridge after installing the new stylus. Just make sure you seat the new stylus fully into the cartridge body. You might want to practice removing and reinstalling the old stylus to gain familiarity with the process. Next, align the cartridge with the old stylus in place. Finally, remove the old stylus and install the new one.
Good luck,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thoughts on Dynavector 10X5 for my TT and system? - John Elison 05/23/1720:20:15 05/23/17 (3)
- IME ya can't count on all cantilever angles being identical on user replaceable stylus assemblies. nt - Rick W 22:32:42 05/23/17 (2)
- To each his own! - John Elison 01:15:43 05/24/17 (1)
- Yes. Just pointing out that some adjustment may be necessary even with a user replaceable stylus assembly. nt - Rick W 09:15:49 05/24/17 (0)