Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Grado ZF3 cartridge wiring posted by waltern on January 13, 2017 at 16:30:27:
Is to use an ohm meter. Harbor freight sells a cheap one that works just fine for 5.99. Disconnect each lead and verify less than half an ohm from the cartridge lead to the RCA ends. The positive leads for each channel should be on the center line and the negative on the outer shells.
I have seen this wrong on tables straights out the box. On Music-Halls, Sotas, and Regas. Rare but possible.
With the POS/neg reversed the sound will not be a huge difference. It will almost give an off-center feel.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The ONLY way to know for certain... - samstone 01/15/1706:39:33 01/15/17 (1)
- RE: The ONLY way to know for certain... - waltern 18:06:49 01/15/17 (0)