Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Technical Advice Needed - Phono Output for Adjust Plus posted by flood2 on March 19, 2016 at 16:13:45:
I'm running the phono preamp output into the external sound card. I'm using the line input for the sound card.Soundcard specs in manual state:
1 Vrms (2.828 Vp-p) for line out
1 Vrms (3.677 Vp-p) for line inXono output impedance is 300 ohms single ended or balanced. Don't have the input impedance of the sound card, but may have to measure it.
I don't actually need the 20 dB headroom as the Adjust + test signal is a constant 0 dB and this is to set the azimuth properly and run any frequency sweep tests only. Once I'm done with that and make any adjustments, I disconnect Adjust + and listen to records.
Thanks!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Xonon & Sound Card Specs - Barry 03/20/1614:29:57 03/20/16 (11)
- RE: Xonon & Sound Card Specs - flood2 16:14:55 03/20/16 (10)
- RE: Xonon & Sound Card Specs - Barry 18:15:04 03/20/16 (9)
- RE: Xonon & Sound Card Specs - flood2 19:24:59 03/20/16 (8)
- I get it now. THANKS! - Barry 06:56:21 03/21/16 (1)
- You're welcome! - flood2 17:20:17 03/21/16 (0)
- RE: Xonon & Sound Card Specs - John Elison 20:00:47 03/20/16 (5)
- RE: Xonon & Sound Card Specs - flood2 20:17:56 03/20/16 (4)
- RE: Xonon & Sound Card Specs - John Elison 21:23:02 03/20/16 (3)
- RE: Xonon & Sound Card Specs - flood2 22:19:48 03/20/16 (2)
- RE: Xonon & Sound Card Specs - John Elison 23:19:43 03/20/16 (1)
- RE: Xonon & Sound Card Specs - flood2 00:10:58 03/21/16 (0)