|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Has anyone used an oscilloscope to align for zenith and azimuth? posted by tonyptony on November 29, 2015 at 19:12:23:
my problem is the displays on an o'scope aren't stable due to the test record being off center, minor record warps, etc. so there's somewhat limited resolution. Do you have a storage scope?Useful for VTF & anti-skating to see mis-tracking on each channel. For azimuth & VTA you could also use in XY mode to compare the channels for amplitude and phase and make your adjustments to align for symmetry. For measuring cross-talk drive channel A and measure output in B and vice versa and adjust to minimize both as you have noted.
I'm thinking Adjust + is easier and more accurate but haven't tried it. Let's see what others say.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Maybe others have had better luck on this but - Barry 11/29/1519:38:41 11/29/15 (5)
- +1 for the Adjust + Software - Des 02:31:42 11/30/15 (3)
- RE: +1 for the Adjust + Software - John Elison 05:58:48 11/30/15 (2)
- Missed these old posts - Thanks! - Barry 09:01:23 11/30/15 (1)
- RE: Missed these old posts - Thanks! - John Elison 11:20:18 11/30/15 (0)
- RE: Maybe others have had better luck on this but - John Elison 20:38:38 11/29/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
