Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: studs only! posted by richardl on April 30, 2013 at 14:57:53:
Both shelves were mounted to the studs only.Think I got it solved.
I've always heard Rega & Linn like a light rigid mount.
Well not here anyway, so I decided to go the other direction.First, I took an unused sheet of Dynamat and applied it between the shelf & the wall. Stuck the remainder on other areas of the metal Target shelf frame that seemed prone to ringing. Don't know if it helps, but it probably can't hurt.
Got a 2" thick butcher block from Bed Bath & Beyond.
Took the stock thin wood Target shelf off the frame.
Put some of Herbies Cone/Spike Isolation Bases on the upward facing shelf screws (Blu-tac held them in place) Put dome Herbies Grungebuster dots on top of the bases, and sat the butcher block on that.Cranked it up......
No feedback! Yayyyyyy.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: studs only! - Todd R 04/30/1317:29:02 04/30/13 (0)