|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Incognito Wire Installed in Origin Live Modified Rega RB250 (quite long) posted by NewbieBaby on June 25, 2000 at 14:02:12:
I also just completed the installation of Incognito wire on my RB300 (Basis version with VTA). Echoing NB's sentiments, found it to be a breeze; although without the OL mod, it's necessary to separate the arm from the base (much more frightening sounding than it is in reality -- instructions cover this very well), in order to facilitate passing the wire through the arm.Note: for removing the tiny rubber gaskets from the pillar holes base, I found the low E string from a guitar string perfect for pushing the pieces out intact.
This portion of the operation took a total of 20 minutes (and I am not an expert -- my last DIY was the Dynaco SCA-80Q kit I assembled back in 1968!). Soldering the cartridge clips is definitely the most difficult part of the process -- wish I had read this thread before, NB's got some great tips.
I'll try to give a report on sound sometime this weekend after burn-in...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Incognito Wire Installed in Origin Live Modified Rega RB250 (quite long) - Chazmo 06/26/0007:16:31 06/26/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2026, Audio Asylum, all rights reserved ]