![]() |
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Thanks! posted by John Elison on January 9, 2010 at 12:58:43:
Based on your post, I played around with the anti-skate for the last couple of hours and found a very minimal anti-skate that allows the Delos to track Track 9 pretty cleanly. "Less was more" in this case and ended up the lowest mechanical skate setting (one "donut" weight vs three). It actually does 9 with only the slightest hint of buzz. Also when I observed the cantilever in and out of the groove, I can detect no visible "skewing". This the my first "long" arm and I suspect the longer the arm, the more skating may be a factor. Can't explain the logic behind my geometry, but a 1.5 inch longer "moment arm" would like generate more skating force if my logic is sound. The cart is starting to get a few more break in hours and I suspect the suspension has settled a little.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I played some more with anti-skate - varkdriver 01/9/1014:22:46 01/9/10 (3)
- RE: I played some more with anti-skate - John Elison 16:34:55 01/9/10 (2)
- You are correct, but I may also be right... - varkdriver 17:34:06 01/9/10 (1)
- Okay, I see your point.... - John Elison 19:06:06 01/9/10 (0)