|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: ET-2 Arm Wands posted by reverendclark on April 18, 2002 at 23:29:23:
It is, I believe, a later upgrade to the arm for better shielding of the signal and reduction of hum/noise. If you look closely, you will also see that the damping wrap is slightly thicker on the arms with the metal braid--at least, the difference is noticeable when I compare my plastic- and metal-braid arms. The metal-braid arms are also slightly heavier than the earlier arms, making them more suitable for medium- to low-compliance cartridges.I haven't gone back to check, but IIRC at the ET site there is a reprint of an old Positive Feedback article on upgrades that mentions the differences in wands.
John K.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: ET-2 Metal Braid - thegage 04/19/0205:32:50 04/19/02 (2)
- Re: ET-2 Metal Braid - reverendclark 07:07:41 04/19/02 (1)
- Don't quote me! - thegage 10:55:28 04/19/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
