A good friend of mine has owned this preamp for many years without a single problem until now. He's getting limited gain in the right channel and the left channel seems fine. I tested all of the tubes and they all still test nearly 98% of NOS values. As the tube sockets are mounted to a printed circuit board, it's not quite as easy to trace the circuit had it been point to point construction. I searched like crazy, found the recommended tweaks ,as in removing the OA2 regulator tubes, etc., but I'd still like to see a full schematic of the circuit, especially the power supply. I can see that R 31 and R 32 resistors have seen a bit too much heat as they have discolored the circuit board. Any help will be greatly appreciated. Thanks, Paul
This post is made possible by the generous support of people like you and our sponsors:
Topic - Audio Innovations P2 phono preamp schematic needed - wpod 15:29:36 07/25/13 (1)
- RE: Audio Innovations P2 phono preamp schematic needed - copydex 13:56:49 07/28/13 (0)