In Reply to: What timing...... posted by dadbar on June 5, 2007 at 19:25:42:
Great- thanks so much, I just contacted them and ordered 6 of each (frosted and non frosted) to experiment with. My only real concern is if they will run cool enough, the original bulbs were spec'd at 7 volts, 2watts, 6x43mm and only get moderately warm even after being on for hours. I had been experimenting with some Sylvania model # 211-2, 12 volt auto lamps that I bought locally for $1.99 the pair. These have large endcaps which I first flattened to fit and eventually removed. I then coiled some 20 gauge solid core copper around a former (3/16 dowel) and then tinned and soldered to the contact wire coming out of the glass on both ends. It works fine, but they run very hot, so I have no plans to use them for any length of time. I'll report my findings when the good bulbs arrive. Thanks again, wpod
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: What timing...... - wpod 06/6/0708:11:18 06/6/07 (1)
- RE: What timing...... - dadbar 10:24:51 06/6/07 (0)