|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: K40y9 PIO caps paralleled with MKT1813 posted by KanedaK on November 25, 2019 at 00:22:25:
Glad you're making progress. I've seen your thread on diyA. There must be a way to determine the noise source, and a reason why this new unit is affected and others not.
The higher voltage cap will be bigger, so make sure it'll fit. I don't know anything about the sound of Siemens caps. What I do know is that the coupling position takes the longest to break in.
I wonder if you really need 10uf, or if you need one at all on the input. Didn't you experiment with removing input caps from some other gear?
By the way, I owned one of those TDM xovers about 20 years ago. Used it on a non-critical system so I couldn't fully evaluate the signal quality, but thought it was noisy and got rid of it. I did not experiment with mods.
berate is 8 and benign is 9
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: K40y9 PIO caps paralleled with MKT1813 - madisonears 11/25/1918:19:44 11/25/19 (1)
- RE: K40y9 PIO caps paralleled with MKT1813 - KanedaK 02:30:23 11/26/19 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]