Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Capacitor upgrade with higher voltage rating. posted by Duster on July 16, 2018 at 15:36:24:
Fifteen mm longer, but maybe they can just lay on top of those other tiny components. Keeping the leads short is important, but that shouldn't be a problem with identical spacing, diameter. The KW leads might be appx 0.008" larger diameter (.8mm, can't find FC dia but might be .6mm), and that could cause minor difficulty depending on PCB. Don't see anything else to worry about. If 16v works, 50v might be better, will last longer. Caps don't establish supply voltage.
FC to KW should yield nice improvement. FC can be a bit sterile; KW should warm things up, maybe open it up a little. I'd like to know if higher voltage makes a difference for same model cap. Ever test for that?
C14 and C15 look like small value bypass caps. You might have a look at those when you have the board out. Could be worth a tweak.
Peace,
Tom E
berate is 8 and benign is 9
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Hope they fit - madisonears 07/16/1819:06:42 07/16/18 (17)
- They fit fine. - Duster 19:53:56 07/16/18 (16)
- Nichicon FW - Salectric 05:09:34 07/23/18 (10)
- " In the bias supply of my push-pull amps" - 1973shovel 06:11:05 07/23/18 (9)
- RE: " In the bias supply of my push-pull amps" - Salectric 07:36:37 07/23/18 (8)
- 1000 uF? - 1973shovel 08:18:02 07/23/18 (7)
- RE: 1000 uF? - Salectric 08:38:58 07/23/18 (6)
- Ahh, here it is - 1973shovel 10:11:39 07/23/18 (5)
- RE: Ahh, here it is - Salectric 11:09:10 07/23/18 (4)
- RE: Ahh, here it is - 1973shovel 12:15:30 07/23/18 (3)
- RE: Ahh, here it is - Salectric 12:54:37 07/23/18 (2)
- "Your photo brings back memories for sure" - 1973shovel 13:40:35 07/23/18 (1)
- RE: "Your photo brings back memories for sure" - Salectric 14:21:37 07/23/18 (0)
- RE: They fit fine. - KanedaK 00:08:40 07/21/18 (4)
- From the late Al Sekela... - 1973shovel 06:52:03 07/21/18 (2)
- RE: From the late Al Sekela... - Duster 10:13:28 07/22/18 (1)
- 2004 - 1973shovel 04:56:04 07/23/18 (0)
- RE: They fit fine. - Duster 03:52:15 07/21/18 (0)