|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: You sure you want to fix it? posted by jea48 on April 7, 2018 at 21:10:25:
Can't rock part back and forth while heating solder of either lead.
More solder on each lead.
Snap-in leads and larger caps, as well as larger pads and PCB traces, absorb a lot of heat from the iron. Two-sided board is even worse because solder goes all the way through board, up pins and onto pad on other side.
Often they're glued down.
Peace,
Tom E
berate is 8 and benign is 9
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- briefly - madisonears 04/9/1823:11:09 04/9/18 (3)
- Thank you for your response. - jea48 12:52:03 04/11/18 (2)
- RE: Thank you for your response. - madisonears 19:51:23 04/12/18 (1)
- Thank you. nt. - jea48 06:09:15 04/14/18 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
