|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Oyaide vs. Furutech vs. Bocchino XLRs? posted by Duster on January 3, 2018 at 15:02:53:
A cold solder joint is one which becomes open circuit because there is not a consistent mechanical connection between the components being joined and the applied solder is stressed enough to break the joint or was not adequately melted to form a proper bond begin with.
Any decent compression mechanism will maintain contact whether through a tinned surface or directly onto base metal. The tinned surface will better resist corrosion, which is the real enemy of proper conductivity between joined components.
Peace,
Tom E
berate is 8 and benign is 9
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- not entirely accurate - madisonears 01/4/1819:21:53 01/4/18 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]