Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: A plate upon which to build and isolate a crossover network posted by jeffreybehr on February 5, 2016 at 21:40:12:
...rather dead. Each is about 10mm thick, and after being trimmed to 12X11", each PAIR of tiles will weigh almost 10 pounds. I decided to use Dynamat Extreme, the thicker version of the automotive-panel-damping material to damp the tiles further. I'll roll a layer or two onto the bottom of each tile and see how they 'sound' and then glue them together with the same kind of 3M spray-on cement I used with my recent amppad project. I expect that each two-layer plate including Dynamat will weigh at least 11 pounds and ought to be REALLY dead.
Haven't yet decided how to adhere the components to the granite...maybe hotglue, maybe urethane-based windshield adhesive (below).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I finally found some granite 12"-square tiles that are... - jeffreybehr 02/16/1620:21:01 02/16/16 (0)