|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: where did you get... posted by Cougar on January 23, 2015 at 19:16:42:
Good question...my mistake.
Still, the scenario is the same.
Then you can replace the amp's 330uf input caps with a pair of jumper wires.
The rest of the fine tuning will/might be done to the output stage of the BAT. Again, depending upon the topology. Victor can help you with this.
It may be possible or necessary to increase both the amp's input Z and the BAT's output load if you want a high quality low uf(below 1.0uf) coupling cap in the preamp.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: where did you get... - wheezer 01/23/1520:43:31 01/23/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
