Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Cold Soldering? posted by msleber on September 28, 2005 at 14:54:37:
If money wasn't an issue, I'd get a Hakko 936 (can be had for around $80 to 90). For half that a Weller WLC100 isn't bad for a 40watter.
For the budget conscience cheapskate, an Elenco SL540 is a workable solution, but won't last as long as either the Weller or Hakko....but can be had for under $30.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Hakko vs. Weller - tommytube 09/28/0515:25:16 09/28/05 (6)
- Re: Hakko vs. Weller - TheAmpNerd 20:58:41 09/29/05 (1)
- The Hakkos are just damn nice, and reasonably priced (nt) - sjmikeb 16:30:39 09/30/05 (0)
- Metcal if money is no object (nt) - Chris_F 07:37:51 09/29/05 (0)
- Re: Hakko vs. Weller - dickmc 19:50:11 09/28/05 (2)
- Re: Hakko vs. Weller - Pooge 07:04:51 09/29/05 (1)
- Re: Hakko vs. Weller vs Circuit Specialists. Also good inexpensive desolder iron. - dickmc 17:39:48 09/29/05 (0)