|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Tre', another question...... posted by Tre' on February 14, 2024 at 06:56:51:
The cross-over board is a perforated plastic board, with the
banana sockets mounted to it.
The jumper wires from the amp output terminals are <6"long, 14 awg.
The speaker cables are around 14' also 14 awg.
Since speaking to you about a hybrid cable hook up, I added another run of 14/2 wire, per channel, netting me a 11 AWG equivalent.
Better imaging, more relaxed sounding.The wires from speaker terminals to cross over sections are < 30", also 14awg.
Wires from x-over boards to speakers are < 15",18awg to tweeters,14 awg to mid woofers.The speaker x-overs have been upgraded with better components, the the Hi pass and midwoofer sections were mounted on the back of the speakers (external) on vibration isolators for vibe protection.The 2 sections are 6-8" apart to minimize the cross talk between coils.
The speaker were remounted with "hurricane nuts", I found the mdf baffle speaker mounting hole threads had turned to dust. Much better...
nice sound....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- more info..... - walkstoslow 02/14/2411:45:50 02/14/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
