Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Continued adventures & a pic




As per Chris and Alan, the earthing wire gauge does make a difference to the sound. As per Al and all of the above, these things do sweeten up further with a week or more of burn in. I"m really having fun here!

I just started replacing my older R-Cs on AC cables with these Ti-Shielded newer versions and so far no adverse affects. I'll report on this later as I go along and they burn in.

Meantime, here's a crappy picture of the first one with the speaker cable grounds crudely tied in. (I realized after posting that this photo showed only 2 ground wires from the speaker/amp R-Cs and there are actually 3; one had come loose!) What you should see if you were here is: 3 ground wires coming from the speaker cable R-Cs (one is in a combined box at the amp end, rather than 2) wirenutted into 3 14 AWG ground wires from the AC R-C filter; a white PVC plumbing fitting as the base of an eventual housing; inside the fitting is a Ti-shield and microsorb strip surrounding the X rated R-C filter array of 3 C values as described previously. What you cannot see is that the TI is grounded into the same plug as the AC filter below with a 12 AWG ground wire, nor can you see the 3 prong plug at the bottom.

I like housing these things in the plumbing fittings for safety and aesthetics, but you don't really have to do that at all.


This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.