|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: I do use the 12 AWG posted by bartc on December 3, 2007 at 06:18:18:
Yes, I think that if you changed the THHN gauge that you are using will make a difference. How much, I would have to duplicate to be sure. The point is you are terminating at 14ga, not 12ga. So if there is a bit of performance gain wouldn't be worth it to try?
I know what you are saying regards to some AC male plugs only being able to accept 10ga. I recommend taking 10ga. from the plug and branching out to 12ga to each TI-Shield termination. If you do not have any 10ga. wire which is really inexpensive to purchase, use two 12ga. to simulate the 10ga.
Try it and let me know what happens. Based on my experiments, you should hear a difference.
Chris
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I do use the 12 AWG - cdc 12/3/0710:29:35 12/3/07 (5)
- Good ideas, I'll try it and report back. nt - bartc 12:32:56 12/3/07 (4)
- Excellent. By the way... - cdc 14:29:43 12/3/07 (3)
- Jeez, Chris (and Alan M) are right! - bartc 20:02:25 12/4/07 (2)
- Bro, I experimented for about three months... - cdc 22:41:38 12/5/07 (1)
- You did indeed tell us all that! - bartc 06:00:30 12/6/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
