|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: How do you unsolder DIL8? posted by groman on January 5, 2002 at 05:45:32:
I bought 20 NE5532 for almost nothing.
Maybe I could use one of these
as this CD-player is not top of line.And the 100uF elyts is also removed!
Why use such, when there are
10-22uF Polypropylens for little money?
I can't understand Pioneer's Thinking about
putting them at Audio Output.
Can you?When I unsolder I use:
low watt iron, 15w
sucker
a tiny flat point screwdriver*I heat up, suck solder from legs, as good as I can
*heat again, while putting the screwdriver
with gentle push, between board and IC
*same again, but with screwdriver at other end of IC
*repeating the last 2 steps, until IC comes off
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Unsoldered JRC 4558 from Pioneer PD-S504 - groman 01/5/0207:06:32 01/5/02 (1)
- Re: Unsoldered JRC 4558 from Pioneer PD-S504 - John S. 12:22:03 01/5/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
