|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: PVC pipes: any pics? Don't quite understand posted by Cliff Wee on May 8, 1999 at 21:46:20:
The bases of my present lenses were constructed as follows: Draw a template of the lens base on paper, ie, three 2 1/2 inch circles in line with the correct separation. Transfer this to a 4 by 10 inch piece of 3/4 inch plywood. Drill out the holes with a hole-saw (Skill makes an adjustable one). Jam the pvc tubing into the base with 2 thick nylon cable ties tight enough to keep the tubes from slipping out the bottom. 3 L-brackets would work as well. Attach 4 screws to the bottom for feet to hold the entire thing 1/2 inch off the floor. Make a smaller version of the base to hold the tubes in allignment at the top. -The whole thing looks sloppy, which is why I'm looking for a better base.-John
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: PVC pipes: any pics? Don't quite understand - John Wyant 05/9/9910:55:53 05/9/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
