|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Jon Risch : Need your advice on DIY bass trap !! posted by Jason Michael on August 23, 2005 at 05:00:21:
With normal building grade fiberglass at approx. 0.5 lbs per cubic foot density, I recommend compressing a 6" thickness down to 1 3/4".With yours being a little higher density, then compressing down to around 1 7/8".
BTW, the optimu amount of compression is called out in the DIY Acousticvs note, at:
The original JR DIY Acoustic Treatment Note:
http://www.geocities.com/jonrisch/a1.htmJon Risch
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Jon Risch : Need your advice on DIY bass trap !! - Jon Risch 08/24/0517:00:58 08/24/05 (5)
- What about rigid heating pipe insulation for bass traps? - darkmoebius 10:44:06 08/25/05 (1)
- Forget it, found the answer in the archives....nt - darkmoebius 12:33:49 08/25/05 (0)
- Re: Jon Risch : Need your advice on DIY bass trap !! - Jason Michael 04:21:35 08/25/05 (2)
- Re: Jon Risch : Need your advice on DIY bass trap !! - Jon Risch 10:17:32 08/25/05 (1)
- Re: One more question Jon !! - Jason Michael 15:45:14 08/30/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
