|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Jon Risch DIY Wall Panel Positioning Question posted by dave123456@mail.com on September 10, 2004 at 08:29:37:
In general, you have the panels where they need to be for best results.Of course, every room is slightly different, but for the typical room pressed into service for a sound room, the placement recommendations I call out in the original DIY Acoustic Treatment artilce (at:
http://www.geocities.com/jonrisch/a1.htm )
near the end, is going to make the best of a limited number of panels, traps and diffusors.If you only have two panels, the next thing to go for would be to make another pair, and place them at the side wall 1st reflection points, this would be the next big gain to be had.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Jon Risch DIY Wall Panel Positioning Question - Jon Risch 09/10/0422:42:21 09/10/04 (2)
- Jon Risch DIY Wall Panel Positioning Question - dave123456@mail.com 01:16:48 09/11/04 (1)
- Re: Jon Risch DIY Wall Panel Positioning Question - Jon Risch 08:06:15 09/11/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
