Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Re: Thanks again

Well, I have no idea what an Xtal source is. Also, I will need to study the Wein bridge oscillator curcuit more to understand it. I am still curious how this Axis motor control board works. I found this on rec.audio.tech:

"Motor is driven by two analog high voltage power stages,which provide two artifical generated sine waves with 90 degree phase shift.
So far I tracked down the circuitry. It consists of standard OPs,comparators and CMOS-analog-switches. A little bit tricky,as it incorporates what I call a mixed analog/digital feedback loop.Maybe a zero crossing detector on the motor-windings,which is coupled trough flip-flops and analog switches to the oscillator."

Would this info ring a bell?

When I meaure, do you mean that I should measure both the AC line and the line going to the motor?

Thomas




This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Follow Ups Full Thread
Follow Ups
  • Re: Thanks again - Thomas 03/26/0202:20:15 03/26/02 (0)


You can not post to an archived thread.