|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Let me restate my question for further focus posted by Jon Risch on March 9, 1999 at 18:29:12:
Forget to refer to the problem of a limited bandwidth high sensitivity driver. The problem here is that with a limited bandwidth driver, the crossover point may want an overlap to make a good amplitude and phase match, but it will almost always cause a Z dip too. If it is to much of a dip, then it could begin to be a problem for a low power amp.I would not get too worried about driving a mild dip with a SET or tube amp, as they often are more stable than SS amps into difficult loads.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Oops! - Jon Risch 03/9/9918:33:01 03/9/99 (1)
- Much thanks, filed away, whens the book anyway? - Edp 21:13:45 03/9/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
