Home Radio Road

Which tuner to get and getting the most from it. Thank God, for the radio!

Re: EICO Classic 2200 Tuner. Power supply Mods

One more mod with a forthcoming review of the I.F. strip coupling caps. I usually change ceramic with silver mica and most are in the pico farid range.

As for the present mod, I can not say if sonics were improved as I did not perform an A/B test. As a precaution I replaced the electrolytic three section can type capacitor with a new unit. The original had three sections rated at 40uf @ 350 volts each (overkill). I had a new capacitor with 40uf @ 400vdc, 20uf @ 350vdc & 10uf @ 300vdc. One does not need 40uf when a RC filter is used & current draw about 10-15ma on the 'sections'. I also bypassed the two sections after the first voltage dropping resistor with a polyproplene 2uf @ 400vdc capacitor on each section. This is usually reserved for high-end DIY amplifiers.

Anyways, just a good measure installing a new electrolytic capacitor.


This post is made possible by the generous support of people like you and our sponsors:
  Atma-Sphere Music Systems, Inc.  


Follow Ups Full Thread
Follow Ups
  • Re: EICO Classic 2200 Tuner. Power supply Mods - Jimmy 12/27/0408:02:27 12/27/04 (0)


You can not post to an archived thread.