|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: 6bq5 triode configuration? (Longer) posted by Damir on March 9, 2002 at 13:35:34:
Well, I disconnected all connections to pins (4) #9 including the resistor and jumper coming form the filter capacitor. I then soldered a 100ohm/1 watt resistor between pins #7 & #9 for all four tubes. I turned the amp on and all that came out was a hum through the speaker in the right channel. No other sound was heard. I wred the amp back to normal and it work fine.Lance
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 6bq5 triode configuration? (Longer) - chopper87 03/9/0215:45:18 03/9/02 (4)
- Re: 6bq5 triode configuration? (Longer) - Damir 00:17:13 03/10/02 (3)
- Re: 6bq5 triode configuration? (Longer) - chopper87 06:24:03 03/10/02 (2)
- Re: 6bq5 triode configuration? (Longer and longer) - Damir 09:19:46 03/10/02 (1)
- Re: 6bq5 triode configuration? (Longer and longer) - chopper87 13:48:17 03/10/02 (0)
- Re: 6bq5 triode configuration? (Longer and longer) - Damir 06:16:36 03/11/02 (0)
- Re: 6bq5 triode configuration? (Longer and longer) - chopper87 09:36:58 03/11/02 (0)
- Re: 6bq5 triode configuration? (Longer and longer) - chopper87 07:58:42 03/11/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
