![]() |
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: 6bq5 triode configuration? (Longer) posted by Damir on March 9, 2002 at 11:29:59:
Damir, All 4 6bq5s are connected in a daisy chain from pin#9 to pin#9 with jumper wires. The second and third 6bq5 are also connected to the CAN type filter capacitor. One is connected by a simple piece of wire (jumper) and the other is connected from pin #9 to the filter capacotor bya 350 ohm 10 watt resistor.
Do I disconnect all daisy chained pin #9 connections and those going to the filter capacitor from pin #9 on tube 2&3 (middle two 6bq5s) prior to inserting the resistor between pis #7 & #9?Lance
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 6bq5 triode configuration? (Longer) - chopper87 03/9/0212:19:34 03/9/02 (7)
- Re: 6bq5 triode configuration? (Longer) - Damir 13:35:34 03/9/02 (6)
- Re: 6bq5 triode configuration? (Longer) - chopper87 15:45:18 03/9/02 (4)
- Re: 6bq5 triode configuration? (Longer) - Damir 00:17:13 03/10/02 (3)
- Re: 6bq5 triode configuration? (Longer) - chopper87 06:24:03 03/10/02 (2)
- Re: 6bq5 triode configuration? (Longer and longer) - Damir 09:19:46 03/10/02 (1)
- Re: 6bq5 triode configuration? (Longer and longer) - chopper87 13:48:17 03/10/02 (0)
- Re: 6bq5 triode configuration? (Longer and longer) - Damir 06:16:36 03/11/02 (0)
- Re: 6bq5 triode configuration? (Longer and longer) - chopper87 09:36:58 03/11/02 (0)
- Re: 6bq5 triode configuration? (Longer and longer) - chopper87 07:58:42 03/11/02 (0)
- Re: 6bq5 triode configuration? (Longer) - chopper87 13:57:28 03/9/02 (0)