|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Eico HF-60 or Dynaco Mark3 posted by Johnny K on January 22, 2001 at 16:57:52:
Hi--You may know that the Eico HF-60 is much older in design and is basically an US version of the Mullard circuit with the English high gain pentode input stage but with a lower imped driver than the orig Mullard circuit. The ones I have seen use the huge Acrosound TO-300 output transformer. These amps go for more than the Dyna, are more of a collectors item and are rare compared to the Dyna. They will always be very special. As far as sound would not hazard a guess but in many ways the HF-60 is special. Also it is more expensively built since there are no PC boards. The problem with the HF-60 is that good ones are rare and if you can get two good ones at a reasonable price go for it. Max
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Eico HF-60 or Dynaco Mark3 - Max 01/22/0117:09:44 01/22/01 (4)
- Re: Eico HF-60 or Dynaco Mark3 - Johnny K 18:28:24 01/22/01 (2)
- Re: Eico HF-60 or Dynaco Mark3 - Max 15:14:53 01/23/01 (0)
- Re: Eico HF-60 or Dynaco Mark3 - PeterCapo 09:13:27 01/23/01 (0)
- Re: Eico HF-60 uses Acro TO-330 not TO-300 - Max 17:24:12 01/22/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
