|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Experiments with "UltraPath" connection posted by J Epstein on March 6, 2001 at 13:58:11:
> > > FYI, I tried UltraPath as described above, and I didn't hear much if any difference between it and the conventional return path. I think I used a 40uF oiler for the UP cap, in a conventional single ended output stage. The power supply was CLCLC, with the second C changed from ground to cathode for the experiment. < < <I was thinking about this and I was wondering what you are using for cathode resistor and cathode bypass cap. Maybe you are so well bypassed to ground with a big Black Gate cap or something that it may be reducing any impact by going to your UltraPath. I am wondering how this could have no appreciable effect with your situation. If anything it ought to be more pronounced than what I get, unless you are AC grounded extremely well.
Kurt
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Experiments with "UltraPath" connection - Kurt Strain 03/6/0117:36:51 03/6/01 (2)
- 100uF Panasonic TSHA, it's a good electro but not the "best." [nt] - J Epstein 11:27:31 03/7/01 (0)
- Re: Experiments with "UltraPath" connection - BFitz 21:09:18 03/6/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
