|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Experiments with "UltrPath" connection posted by Kurt Strain on March 6, 2001 at 11:12:50:
kurt, I'm not sure that's "UltraPath" as originally designed, I think you are supposed to use the Ultrapath cap by itself after the final filter choke or resistor, instead of and not in parallel with the final filter cap.Not sure how the results would differ though.
FYI, I tried UltraPath as described above, and I didn't hear much if any difference between it and the conventional return path. I think I used a 40uF oiler for the UP cap, in a conventional single ended output stage. The power supply was CLCLC, with the second C changed from ground to cathode for the experiment.
-j
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Experiments with "UltraPath" connection - J Epstein 03/6/0113:58:11 03/6/01 (4)
- Re: Experiments with "UltraPath" connection - Kurt Strain 17:36:51 03/6/01 (2)
- 100uF Panasonic TSHA, it's a good electro but not the "best." [nt] - J Epstein 11:27:31 03/7/01 (0)
- Re: Experiments with "UltraPath" connection - BFitz 21:09:18 03/6/01 (0)
- Re: Experiments with "UltraPath" connection - Kurt Strain 15:50:25 03/6/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
