|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: "Snap" in one channel of Conrad Johnson MV-50 amp posted by PeterI on March 3, 2010 at 16:15:46:
Since you just got this amp,...
Be sure that the correct fuses are installed on the B+ voltage supply. My C-J amp would make "snapping" noises and sometimes cutout after warming up. Touching the fuse holders would also cause it. The culprit turned out to be the wrong size fuse. BBS-1 and KTK-1 fuses are rated the same electrically but are not the same physically. C-J switched to a fuse holder that could use both, but the earlier models needed KTK-1's.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Correct Fuses. - DustyC 03/4/1007:49:43 03/4/10 (4)
- RE: Correct Fuses. - tvr2500m 12:11:51 03/5/10 (0)
- RE: Correct Fuses - I seem to have just blown a BBS-1 - PeterI 17:03:53 03/4/10 (2)
- RE: Correct Fuses - I seem to have just blown a BBS-1 - DustyC 17:19:24 03/4/10 (1)
- RE: Correct Fuses -Thanks - PeterI 22:33:32 03/8/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
