In Reply to: Re: UTC S-40 power transformer "pinout" needed please. posted by Tom Bavis on October 18, 2005 at 10:33:27:
the same ones (Pat Jankowiak) that I can no longer access either. I figured out most of the taps by simply measuring them, but I am still perplexed by #6, #10, and #14 (center taps?).The problem is that there is a 475 ohm 50 watt power resistor connecting #10 (ground) and #14 that is very hot (too hot)? I subbed in a 1k power resistor and the high voltage taps went up by about 30 volts.The 1k resistor seems to run a bit cooler. Any ideas? Thanks very much, Paul
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Thanks Tom , but those UTC links are............... - wpod 10/18/0513:46:50 10/18/05 (3)
- Re: Thanks Tom , but those UTC links are............... - Tom Bavis 16:54:13 10/18/05 (2)
- Re: Thanks Tom , but those UTC links are............... - olen 00:17:31 10/19/05 (1)
- Just what I needed, Thank you Olen , Any idea........ - wpod 04:02:28 10/19/05 (0)