thats really good to hear!

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

In Reply to: Listening to Edcor 10K/10k intersatges right now... posted by drummerwill on September 29, 2005 at 20:21:45:

Thanks for trying it out!
I've not measured up the 10K:10K for interstage service, I've only looked at the 10K/600 and 150 for line-out preamp duty. You cant run any DC through the primary. So, if not parafeed, then the only other way to fly would be to use a PP pair driving the Edcor primary. Parafeed might be the best, since even with PP, you have to have gm-matched sections to avoid any DC imbalance.
For line out duty, I'm going to try PF, likely the 5687 or ECC99.
But that wont be until later in the winter, right now I am doing
PF 811A. So far, its going derned well. Lots of potential. :)
-- Jim

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

Follow Ups Full Thread

Topic - Advice needed on Edcor push-pull outputs - wpod 10:50:51 09/29/05 (5)

Re: Advice needed on Edcor push-pull outputs - Jim Doyle 23:20:15 09/29/05 (0)

Listening to Edcor 10K/10k intersatges right now... - drummerwill 20:21:45 09/29/05 (2)

Re: Listening to Edcor 10K/10k intersatges right now... - Scholl 03:37:13 09/30/05 (0)

thats really good to hear! - Jim Doyle 09/29/0523:02:02 09/29/05 (0)

Re: Advice needed on Edcor push-pull outputs - Tom Bavis 15:47:30 09/29/05 (0)

Follow Ups

thats really good to hear! - Jim Doyle 09/29/0523:02:02 09/29/05 (0)

You can not post to an archived thread.