|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Yikes! I would not trust those markings! posted by Ralph on October 21, 2020 at 09:57:41:
Please re-read my last post. I determined the voltage coming out of the variac using my fluke meter. I did not use a built-in meter on the variac, because my variac does not have such a built-in meter, for good or ill.If you say those meters are very inaccurate, then that's fine with me. I won't buy one.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Yikes! I would not trust those markings! - Lew 10/21/2014:07:55 10/21/20 (2)
- RE: Yikes! I would not trust those markings! - Ralph 15:02:05 10/21/20 (1)
- Yes, I am well aware that the voltage will sag a bit when the variac is feeding the Bev amplifier - Lew 16:12:50 10/21/20 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
