In Reply to: "Just don't over do it by piling on solder." posted by FenderLover on June 1, 2019 at 08:35:25:
If I were doing it I would wick out the old solder with solder wick and "clean" the pins and traces with a small brass brush or one of those glass fiber "pens". Then re-solder with a good eutectic solder.
"It is better to remain silent and thought a fool, then speak and remove all doubt." A. Lincoln
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: "Just don't over do it by piling on solder." - JKT 06/1/1912:10:52 06/1/19 (1)
- I totally agree with those! - Cougar 17:52:54 06/1/19 (0)