Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

RE: Fixed bias problem, and no, it is not the tubes.




My bias supplies. Note the poly type capacitors that last forever. I use two bias supplies. -19 volts for power 6V6GT tubes & -140 volts for the phase inverters. With bias the phase inverters do not need a large capacitor to ground. Hard to see, but the rectifier bridge is at the bottom. I used 4 diodes for each supply. The silver caps at bottom are .01uF @ 1000 volt capacitors across the bridges to shunt any possible noise. The bias supplies have less than .001 volts ripple.


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.