|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Choke loading is superior posted by Triode_Kingdom on January 10, 2016 at 10:14:23:
I'd try configuring it as a self biased CF. Put the choke on the bottom and the bias resistor between the choke and the cathode. Connect the grid leak resistor to the connection between the the choke and bias resistor, no bypass cap. The grid leak resistor will be "bootstrapped" due to the signal voltage appearing on both ends multiplying its impedance to the input signal by a factor of about ten or more.
"It is better to remain silent and thought a fool, then speak and remove all doubt." A. Lincoln
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Choke loading is superior - JKT 01/10/1610:39:27 01/10/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
