In Reply to: GM 70 posted by sony6060 on December 2, 2014 at 13:12:49:
Please bear in mind that I have only used the GM70 in single-ended mode.For the copper-plates, I recommend approx 685 vpk @ 105 mA per tube - cathode-bias only...a 14 to 16k plate-to-plate primary Z should give you 26 to 27 Watts.
Push-pull filaments should work fine with AC...I have friends who have used AC with PP GM70s.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: GM 70 - Jim Dowdy 12/2/1414:27:45 12/2/14 (1)
- P.S. - Jim Dowdy 14:29:33 12/2/14 (0)