Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

RE: Driving 6Y6GTs with El Cheapo 12AT7 front end?

Jeff,

Take a look at the 6Y6 Data sheet. Notice the low max. plate voltage limit. That does not mesh at all well with the 12AT7 LTP front end found in "El Cheapo".

I take it you want to do another PP amp. Consider a CCS loaded 6922 section voltage amplifier DC coupled to an IRFBC20 "concertina" phase splitter. Use "fixed" bias "finals", with an individual trim pot for each tube. Bridge rectify the O/P of your Triad N-77U to get the B+. CLC filter. The rail will come in at approx. 165 V. and you'll have way more current than you can use. :> D Go full pentode mode and regulate g2 B+ with a VR105. LED bias the voltage gain triode and follow the "textbook" O/P trafo to voltage amplifier cathode GNFB setup.

Edcor's CXPP30-MS-5K seems about right, assuming "normal" Class "AB1" operation is chosen for the O/P stage.


Eli D.


This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.