Running them gently is what causes the problems.

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - Good OP point and driver for SV811-10? - slownlo 18:23:46 07/12/09 (38)

The 811-3 was their best idea. 811-10 is too much like a 211/VT4-C - Jim Doyle 21:10:36 07/13/09 (2)

RE: The 811-3 was their best idea. 811-10 is too much like a 211/VT4-C - PakProtector 03:32:35 07/14/09 (0)

RE: The 811-3 was their best idea. 811-10 is too much like a 211/VT4-C - tube wrangler 21:59:02 07/13/09 (0)

500V / 100mA / 5k - Mark Kelly 16:02:56 07/13/09 (3)

RE: 500V / 100mA / 5k - PakProtector 03:23:18 07/14/09 (2)

Tie the grid to ground. - Mark Kelly 03:49:18 07/14/09 (1)

RE: Tie the grid to ground. - PakProtector 04:27:16 07/14/09 (0)

RE: Good OP point and driver for SV811-10? - RayP 07:50:35 07/13/09 (2)

This SV811-10 is starting to sound more and more... - slownlo 09:18:31 07/13/09 (1)

RE: This SV811-10 is starting to sound more and more... - RayP 13:45:23 07/13/09 (0)

RE: Good OP point and driver for SV811-10? - Al Noakes 23:54:40 07/12/09 (3)

RE: Good OP point and driver for SV811-10? - slownlo 04:21:04 07/13/09 (2)

Running them gently is what causes the problems. - Jim Doyle 07/13/0904:43:29 07/13/09 (1)

RE: Running them gently is what causes the problems. - Michael Koster 08:42:28 07/13/09 (0)

RE: Good OP point and driver for SV811-10? - Michael Koster 21:24:21 07/12/09 (3)

Mike, the datasheet says the Rp is 2.5K for the SV811-10 (nt) - slownlo 04:33:38 07/13/09 (2)

Mike, I'm a little confused here.... - slownlo 05:47:34 07/13/09 (1)

Sorry... I had the SV572-10 - Michael Koster 08:10:34 07/13/09 (0)

RE: Good OP point and driver for SV811-10? - Neff 19:27:50 07/12/09 (4)

Neff, I don't understand how you can do that..... - slownlo 19:51:30 07/12/09 (3)

RE: Neff, I don't understand how you can do that..... - Neff 06:57:51 07/14/09 (0)

RE: Neff, I don't understand how you can do that..... - danlaudionut 22:19:26 07/12/09 (1)

RE: Neff, I don't understand how you can do that..... - PakProtector 03:16:02 07/13/09 (0)

RE: Good OP point and driver for SV811-10? - Michael Samra 18:41:15 07/12/09 (14)

Small point... - Allen Wright 03:07:39 07/13/09 (9)

RE: Small point... - Michael Samra 21:53:39 07/13/09 (0)

RE: Small point... - PM2002 15:45:12 07/13/09 (0)

Mr Wright,....can you please expound on the.... - slownlo 04:39:58 07/13/09 (6)

RE: Mr Wright,....can you please expound on the.... - Allen Wright 06:01:27 07/13/09 (5)

RE: Mr Wright,....can you please expound on the.... - slownlo 06:27:43 07/13/09 (4)

RE: Mr Wright,....can you please expound on the.... - tube wrangler 22:12:20 07/13/09 (0)

RE: Mr Wright,....can you please expound on the.... - Michael Samra 21:59:01 07/13/09 (0)

RE: Mr Wright,....can you please expound on the.... - Michael Koster 09:07:34 07/13/09 (0)

RE: Mr Wright,....can you please expound on the.... - drlowmu 07:24:48 07/13/09 (0)

47 mfd/450 VDC caps off bridge - FenderLover 21:22:08 07/12/09 (0)

whats the spec on the interstage xfr? - slownlo 19:38:12 07/12/09 (1)

Careful - Caucasian Blackplate 21:22:36 07/12/09 (0)

mike you got mail. - lovetube 19:10:38 07/12/09 (0)

Follow Ups

Running them gently is what causes the problems. - Jim Doyle 07/13/0904:43:29 07/13/09 (1)

RE: Running them gently is what causes the problems. - Michael Koster 08:42:28 07/13/09 (0)

Post a Message!