In Reply to: RE: 6SL7 Ratings posted by Thorsten on December 23, 2010 at 08:12:04:
T
> > I agree that all else a higher f3 would be nice to have, but at the same I do not suggest anyone looses sleep, there are bigger fish to fry first.
To me HF extension and non-resonance is
a top priority because of my sensitivity.
So to me there is no bigger fish to fry.
But that is just me I guess.
My ideal speaker is the ribbon but
I have yet to hear a speaker using
one that integrates it well with the
other drivers used in the speaker.
So after many trials I found a tweeter
that had the best highs I could afford.
The winner was the Dynaudio D-260
which I linked to the spec sheet below.
I have no idea as to the phase deviation
at 20KHz from this tweeter so
I didn't have a response to your query.
I don't know anyone who has measured
the acoustical phase response of
any speaker out there.
Electrical phase but not acoustical phase.
A cap is the ONLY part of my crossover
because I have found that inductors
and resistors rob too much music
when used in a driver crossover.
So phase deviation in my speaker
is minimal or as minimal as posible.
The cap is a 4uFd GE Mtr Run bypassed
with a .1uFd Vit Q for a crossover @~5KHz.
The midbass are Audax Aerogel drivers
again very damped from resonances.
DanL
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 6SL7 Ratings - danlaudionut 12/23/1008:43:04 12/23/10 (21)
- Phase Shift - Triode_Kingdom 10:13:01 12/23/10 (1)
- RE: Phase Shift - danlaudionut 13:37:13 12/23/10 (0)
- RE: 6SL7 Ratings - Thorsten 09:59:00 12/23/10 (18)
- RE: 6SL7 Ratings - danlaudionut 11:38:52 01/3/11 (5)
- RE: 6SL7 Ratings - Thorsten 17:08:25 01/3/11 (4)
- RE: 6SL7 Ratings - danlaudionut 22:12:04 01/3/11 (3)
- RE: 6SL7 Ratings - Thorsten 23:36:04 01/3/11 (2)
- RE: 6SL7 Ratings - danlaudionut 03:02:57 01/4/11 (1)
- RE: 6SL7 Ratings - Thorsten 06:51:12 01/4/11 (0)
- RE: 6SL7 Ratings - danlaudionut 13:23:51 12/23/10 (11)
- Hi Dan...I will weigh in on this one: The 6SL7 has a lot of "Goodness" - Minussss3db 16:19:33 12/26/10 (2)
- RE: Hi Dan...I will weigh in on this one: The 6SL7 has a lot of "Goodness" - danlaudionut 19:29:53 12/26/10 (1)
- RE: Hi Dan Yes Dan 1.5v is right for the 6n1p...but I think... - Minussss3db 22:26:49 12/27/10 (0)
- RE: 6SL7 Ratings - Thorsten 20:29:11 12/23/10 (7)
- RE: 6SL7 Ratings - Tre' 21:35:43 12/23/10 (5)
- RE: 6SL7 Ratings - Thorsten 22:55:24 12/23/10 (4)
- RE: 6SL7 Ratings - Tre' 08:59:32 12/24/10 (2)
- RE: 6SL7 Ratings - Thorsten 20:42:46 12/24/10 (1)
- RE: 6SL7 Ratings - Tre' 22:31:23 12/24/10 (0)
- RE: 6SL7 Ratings - Stephen R 02:37:54 12/24/10 (0)
- RE: 6SL7 Ratings - danlaudionut 21:22:04 12/23/10 (0)