In Reply to: This might be close. posted by Tre' on January 16, 2022 at 06:32:53:
I will replace the 220k with some 100k.
As for the zener diode string from what I have read this will be in series with the center tap and not the b+ ?
I also have a problem with the negative bias supply the selenium stack I replaced with a silicon diode I was to inexperienced at the time to account for the voltage or less of a voltage drop and now it will only let me adjust down to -32 which gives me about 18ma on each of the output tubes. Would it be OK to put a zener in the bias supply to shed some volts?
Thanks for all the help!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: This might be close. - joshie 01/16/2210:12:32 01/16/22 (3)
- RE: This might be close. - Tom Bavis 11:08:47 01/16/22 (2)
- RE: This might be close. - joshie 12:12:50 01/16/22 (1)
- RE: This might be close. - joshie 13:33:09 01/16/22 (0)